mmo2008-003-043
INSERT TOOL
Loosen locking nut by turning the tool
counterclockwise (± 4 turns).
mmo2008-003-044_a
TURN TOOL COUNTERCLOCKWISE
Then, to open the driven pulley use the
following tool from tool kit.
mmo2008-003-042
SUSPENSION ADJUSTMENT TOOL
Completely open the driven pulley by
turning the suspension adjustment
tool clockwise.
Turn tool clockwise until it bottoms.
mmr2008-042-001_a
1. Suspension adjustment tool
2. Adjustment ring
To remove the drive belt, slip the belt
over the top of driven pulley.
mmr2008-042-002
Remove drive belt from drive pulley.
Install
and adjust drive belt,
re-
fer to
DRIVE BELT INSTALLATION/
ADJUSTMENT
.
Drive Belt Installation/
Adjustment
NOTE:
The drive belt height must be
checked each time a drive belt is in-
stalled and should be rechecked after
50 km (30 mi).
The maximum drive belt life span is
obtained when the arrow on the drive
belt is directed toward the front of the
vehicle. This will ensure that correct
direction of rotation is respected.
84
______________________
Содержание MX Z TNT 600 HO E-TEC
