Ski-Doo MX Z TNT 600 HO E-TEC, Руководство оператора, Страница: 63 / 120

PRE-OPERATION CHECK LIST
ITEM OPERATION
✔
Body including seat, footrests,
lights, controls and instruments Check that there is no snow or ice.
Track and idler wheels Check for free movement.
Brake lever
Check proper action.
Parking device
Check proper action.
Throttle lever Check proper action.
Switches and lights Check proper action. Tether cord must be
attached to driver clothing eyelet.
Skis and steering Check for free movement and proper action.
Fuel and oil Check for proper level and leaks.
Air silencer prefilter
Check that there is no snow or ice.
Adjustable features Check for optimal adjustment and securely
tightened adjustment locks.
Storage compartment Check for proper latching and no heavy or
breakable objects.
Vehicle vicinity Snowmobile must be pointed away from people
or objects. No one is to be standing in front of or
in back of the snowmobile.
Clothing
Be warmly dressed with clothing designed for
snowmobiling.
Engine Starting Procedure
– Recheck throttle control lever oper-
ation.
– Ensure that the tether cord cap
(DESS key) is in position and that
the cord is attached to your clothing
eyelet.
– Ensure that the engine cutout
switch is in the ON position.
– Grab rewind starter handle, pull
handle slowly until a resistance is
felt, then hold handle firmly and pull
vigorously to start engine.

WARNING
Do not apply throttle while start-
ing.
Vehicle Warm-Up
Before every ride, vehicle has to be
warmed up as follows.
Engage parking brake.
Snowmobile must be securely sup-
ported by the rear bumper using a
wide-base snowmobile mechanical
stand. Track must be 100 mm (4 in)
off the ground.
Attach tether cord to operator's cloth-
ing eyelet.
Start engine and allow it to warm up
two or three minutes at idle speed.
Disengage parking brake.
60
______________________