Ski-Doo MX Z TNT 600 HO E-TEC, Руководство оператора, Страница: 59 / 120

Engine Coolant
Recommended Coolant
Always use ethylene-glycol antifreeze
containing corrosion inhibitors specifi-
cally for internal combustion aluminum
engines.
Cooling system must be filled with
BRP premixed coolant (P/N 219 700
362) or with distilled water and an-
tifreeze solution (50% distilled water,
50% antifreeze).
Coolant Level
CAUTION: Vehicle must be on a lev-
el surface before checking fluid lev-
els.
Check coolant level at room tempera-
ture. Liquid should be at cold level line
(engine cold) of coolant tank.
NOTE: When checking level at low
temperature it may be slightly lower
then the mark.
If additional coolant is necessary or if
entire system has to be refilled, refer
to an authorized SKI-DOO dealer.
mmo2007-009-010_a
TYPICAL
1. Coolant tank
2. COLD LEVEL line
Brake Fluid
Recommended Fluid
Always use brake fluid from a sealed
container meeting the specification
DOT 4 only.
CAUTION: To avoid serious dam-
age to the braking system, do not
use fluids other than the recom-
mended one,
nor mix different
fluids for topping up.
Brake Fluid Level
CAUTION: Vehicle must be on a lev-
el surface before checking fluid lev-
els.
Check brake fluid in reservoir for prop-
er level. Add fluid (DOT 4) as required.
CAUTION: Use only DOT 4 brake
fluid from a sealed container. Nev-
er use any other types of fluid.
mmo2008-008-012_d
1. Brake fluid reservoir
mmo2008-008-018_a
1. Minimum
2. Maximum
3. Operating range
56
______________________