
Brake Condition
WARNING
The brake mechanism on your
snowmobile is an essential safety
device. Keep this mechanism in
proper working condition. Above
all, do not operate the snowmo-
bile without an effective brake
system.
Periodically verify the
condition/wear of the brake pads.
Brake Adjustment
No adjustment is provided for hy-
draulic brake.
See an authorized
SKI-DOO dealer if any problems.
Drive Chain Tension
See an authorized SKI-DOO dealer.
Drive Belt Inspection
Inspect belt for cracks, fraying or
abnormal wear (uneven wear, wear
on one side, missing cogs, cracked
fabric).
If abnormal wear is noted,
probable cause could be pulley mis-
alignment, excessive RPM with frozen
track, fast starts without warm-up pe-
riod, burred or rusty sheave, oil on
belt or distorted spare belt. Contact
an authorized SKI-DOO dealer.
Drive Belt Removal
Open LH side panel.
Remove belt guard, refer to
BELT
GUARD REMOVAL/INSTALLATION
.
To open the driven pulley and remove
the drive belt, first, loosen the locking
nut inside the driven pulley adjustment
ring.
mmr2008-042-003_a
DRIVEN PULLEY
1. Locking nut
2. Adjustment ring
To loosen the locking nut, use the fol-
lowing tools from tool kit.
mmo2008-003-039
SCREWDRIVER PIN
mmo2008-003-040
WRENCH SOCKET 16/18 MM
Insert the screwdriver pin into the
16 mm wrench socket.
mmo2008-003-041_a
1. 16 mm end
2. 18 mm end
3. Screwdriver pin
Insert and set the 18 mm socket end
on the locking nut inside the adjust-
ment ring.
_____________________
83
Содержание MX Z TNT 600 HO E-TEC
