PRODUCT SPECIFICATIONS
SKF Multilog On-line System IMx-16Plus
SKF Multilog On-line System IMx-16Plus
User Manual
Revision Letter A
53 (66)
o
RJ45 and Wi-Fi share a MAC address, not for simultaneous use
o
Support for Modbus TCP/IP (master and /or multiple slave instances)
o
Support for IEC 61850 (communications networks in a sub-station
environment)
•
GPS location data provided by an external GPS module (optional)
o
Communication by Modbus RTU (see RS485 below)
o
GPS with support for Satellite-Based Augmentation Systems
o
Antenna is integral to the GPS module
•
RS485 2-wire serial interface, Modbus RTU
o
‘
RS485
’ (
top end cap) for Modbus sensor or GPS module etc.
o
Note that the terminals marked
‘
RS485
B’ (b
ottom end cap) are not
used / not available
•
USB Type-A (host interface)
–
fitted with an SKF Bluetooth dongle
o
Bluetooth v4.0 LE (Low Energy)
•
USB Mini-B (device service interface)
o
Always use an isolated USB cable, CMON 4133 Mini USB cable
(isolated), to avoid ground loops when connecting to mains powered
equipment
3.2.10 Storage capacity
•
4 GB effective flash memory, configured for pSLC (pseudo single level cell)
mode for higher reliability than normal MLC (multi-level cell) mode
3.2.11 Data processing memory
•
64 MB RAM for data processing
3.2.12 Certifications
•
Calibration traceable to BIPM
•
EMC, when the IMx-16Plus is placed inside a metal outer enclosure:
o
EN/IEC 61000-6-4, EN 50121-3-2, ETSI EN 301 489-1, -17
•
CE certified:
o
2014/53/EU (RED) including ETSI EN 300 328, ETSI EN 301 908-1
•
FCC certified (North America):
o
FCC Part 15B 107/109, ICES-003, FCC Part 15C 15.247 (d),
RSS-447 sect. 5.55.5
o
FCC Part 22H 917/RSS-132 sect. 5.5, FCC Part 24E 328/RSS-133,
FCC Part 25.53(h)/RSS-139
•
DNV GL Renewables certificate
–
valid only when the IMx-16Plus DIN rail
version is mounted in an IP65 cabinet in a wind turbine that is built according
to the DNV GL wind turbine type approval (pending)
•
DNV GL Marine type approval (pending)
•
ABS Marine type approval (pending)
•
Lloyd’s Register Marine type a
pproval (pending)
BIPM: International Bureau of Weights and Measures
3.2.13 Quality control
•
SKF Sverige AB, Luleå is ISO 9001:2015 certified
