PRODUCT SPECIFICATIONS
Enclosure and cabinet mechanical drawings
56 (66)
SKF Multilog On-line System IMx-16Plus
User Manual
Revision Letter A
3.4 Enclosure and cabinet mechanical drawings
3.4.1 IMx-16Plus enclosure
The immediate IP30 enclosure for the SKF Multilog IMx-16Plus is shown in,
, below.
Figure 19
IMx-16Plus enclosure drawing
Note that the height dimension shown here (164,5 mm), excludes end caps and their
mounting screws, as also connectors, dongle etc. Refer also to product
specifications, section
, for overall dimensions and further notes.
3.4.2 IMx-16Plus IP65 cabinets (optional)
The SKF Multilog IMx-16Plus
is usually housed within an IP65 cabinet. Two versions
of these optional cabinets are available from SKF:
CMON 4150: with a pre-drilled gland area
CMON 4151: without a pre-drilled gland area
In the pre-drilled cabinet, the lower (short) wall is predrilled for 17 glands (refer to
for the drilling pattern/arrangement). One entry for a M25 x 1,5 mm gland
(shown as drawing item 14/15) and sixteen entries for M12 x 1,5 glands (typified by
drawing item 16/17), are provided. All (17) cable entries are supplied with blind plugs
fitted, only remove those that will be actively used for cabling and cable glands.
