INSTALLATION AND OPERATING INSTRUCTIONS
SKF Multilog On-line System IMx-16Plus
SKF Multilog On-line System IMx-16Plus
User Manual
Revision Letter A
31 (66)
The R1 and R2 outputs have a, fixed, non-failsafe behaviour (energised on alarm).
2.5.13 System commissioning and security
System commissioning and troubleshooting is supported by the SKF Multilog IMx
Manager, software. This is an SKF app for both Android and iOS devices and is
available from the relevant app store. The app provides features to manage and
configure the IMx system and to visualise measurement data:
•
Perform network configuration tasks.
•
Select and download site specific machine templates.
•
Create stand-alone measurement configurations (see also
).
•
Viewer; shows live data with bar charts, trends, time waveform and FFT.
Note: Viewer works in stand-alone mode only.
•
View measurement configuration, as made via the @ptitude Observer client.
•
Run a SAT (Site Acceptance Test) based on the installed sensors by using
live charts and plots and generate a SAT Report with the relevant
information.
•
Generate a report that shows general IMx information, current IMx network
and Modbus configuration including the company and user details.
•
Update the IMx-16Plus firmware.
To access an IMx system, users must be pre-registered with SKF for that specific
company*, (*in practice this may mean company, operating division, location/site etc.,
depending on how registration is organised). The necessary steps are as follows:
1. Individual users should register for an account at skf.com. This will act as a
Single Sign On (SSO), to access SKF and SKF apps.
2.
The company should submit/update their ‘User Access request form’
:
a. This advises SKF of all authorised users (name, role etc.)
b.
It includes the users’
e-mail address (as registered on skf.com)
c. It specifies the authorised access level (IMx Viewer or IMx Editor)
3. The user installs the IMx Manager app.
4. On first use of the app (
):
a. The user will have no login credentials
b. Will be prompted to send an app registration request
c. CSG-Luleå will cross check the validity of the request and reply
5. When approved, the user can now login with their skf.com credentials and
use the app with the IMx-16Plus device(s).
Help on using the various functionality of the SKF Multilog IMx Manager app is
available in-app.
