sitrex Action 120, Руководство по эксплуатации и обслуживанию

Страница: 6 / 44

Round Baler ACTION 120
USE AND MAINTENANCE MANUAL - 6 -
warranty to become void and relieve the
Manufacturer of any responsibility.
In addition, the warranty shall become void in
the event non-original spare parts are used.
The machine, or parts of it, must be returned
carriage free, even when under warranty.
1.3 MARKINGS
Each machine features an identification plate,
featuring the following data:

Name and address of the Manufacturer;

EU. AP.: European road homologation
number (if is present);

Category: Machine category;

VIN: frame serial number;

LADEN MASS: Mass on the axes;

A-0: Mass on the towing eye;

A-1: Mass on the first axle;

A-2: Mass on the second axle (if is present);

DESIGNATION: Type of machine;

TYPE/VARIANT: Machine model;

MODEL YEAR: Model year;

CONSTRUCTION YEAR: Construction year
of the machine;

«CE» marking;
Identification plate
Data showed on the machine identification plate
have to be quoted at page 4 of this manual and
they have to be always mentioned for eventual
requests for spare parts or need of assistance.
The machine is standards equipped with:

Machine use and maintenance manual

Declaration of «CE» conformity
1.4 DESCRIPTION AND USE OF THE
MACHINE
«ACTION 120» Round Baler manufactured by
SITREX is a machine bearing the CE marking in
conformity with the provisions of the directive
98/37/EC, as described in the declaration of
conformity each round baler comes with
mechanisms for picking up the agricultural
products and for pressing them into cylindrical
bales. The round baler is mounted on an axis with
rubber wheels and is equipped with an adjustable
height drawbar for hooking to the tractor.
The motive power
required for the machine’s
operation is transmitted from the tractor by means
of the power-takeoff shaft (bearing CE marking)
and the connection of the round baler’s electrical
system to the tractor’s 12V power socket.
To connect the electrical system, the power cable
must be connected to the tractor on the 12V
socket, and the light cable to the seven-pin plug.
The hydraulic system of the baler is controlled by
the tractor hydraulic distributor: the machine is
connected to two quick couplings by flexy tubes.
The outputs control the opening cylinder of the
tailgate and lift the pick-up (pick-up) respectively.
The round baler is a machine designed solely for
use in farming, for the picking up of hay, straw,
maize stubble and green forage and their pressing
into cylindrical-shaped bales.
A single operator seated in the tractor seat can
perform the various operations required to Pick-up
and bale the product lying in windrows.
1.5 NOT FORECASTED USE OF THE
MACHINE
DANGER
The operator should use the machine as
indicated in this manual, keeping in mind the
rules of accident, use conditions and technical
characteristics of the machine.
Any other not forecasted use of the machine
excludes the manufacturer from every kind of
responsibility to persons, animals and things.
1.6 SOUND LEVEL
The sound level (airborne noise) has been
measured with the machine running unlade, giving
the following results:
-
Sound pressure level LpAm (A)
…...82 dB
- Sound power level LwA (A).
………102 dB
WARNING
The values measured reveal that the machine
has a high noise level. When operating the
machine,
the operator must use ear
protection, such as appropriate safety
earmuffs or ear plugs, to prevent damage to
hearing (including long-term effects).