sitrex Action 120, Руководство по эксплуатации и обслуживанию

Страница: 34 / 44

Round Baler ACTION 120
USE AND MAINTENANCE MANUAL - 34 -

P.T.O. shaft security bolt: this device is on
P.T.O. shaft. In case of overloading it
beaks down stopping the transmission.

Safety bolt for rotor: it protect the rotor
from excessive strain that could seriously
damage it (Screw M8x45 class 8.8).

Security supports: in case of maintenance
and/or adjustments with the rear door
open, fix the stops on the hydraulic
cylinders.

Grip wedges: must be used to avoid
dangerous machine movements once that
it is disconnected from tractor.

Security protections: the machine side
protections, according to European rules,
are fitted with security locks that
automatically act when the protection is
closed. To open them the operator must
use a suitable tool. After the maintenance,
he has to close them.
WARNING
Be always sure that all protections are well
closed before working or transporting the
machine.

P.T.O. shaft support: has the function to
support it when the machine is stopped. You
haven’t to work or to transport the machine
when the P.T.O. shaft is on this support.

Switch off the tractor and engage the parking
brake by bringing the key with you.

Disconnect the cardan shaft and place it on
the rudder support.

Disconnect the electrical connectors and the
hydraulic couplings.

In case of prolonged stops, insert the wheel
chocks.
5.21 CHECKS AND TESTS

Check the right bolts fixing.

Be sure that all the fixing elements are
lubricated.

Check tyres pressure: look at 3.4.1
– “Tires
pressure”.

Let work few minutes the machine empty to
check the right functioning.

Let run the P.T.O. with low RPM and open
and close the rear door few times.

Switch off the tractor and verify the general
conditions of the machine.
The above mentioned sequence must be made
every time the machine stays without working for
a long period.