sitrex Action 120, Руководство по эксплуатации и обслуживанию

Страница: 20 / 44

Round Baler ACTION 120
USE AND MAINTENANCE MANUAL - 20 -
The un-correct set of the tires on the wheels
rims and a pressure higher than the one
allowed by the tires manufacturers, can cause
dangerous accidents.
Check the pressure comply with the one
showed in this manual and not pass over the
40 km/h road speed.
WARNING
It is absolutely forbidden to start any function
of the round baler during transport on the
road. Before taking the road, turn off the
P.T.O. and switch off the terminal.
3.4.1 Tires pressure
The round baler ACTION 120 can be equipped
with different type of tires. Here below tire
pressure mounted from the manufacturer. For all
the other types of tires please refer to the
manufacturer instructions.
TIRE PRESSURE [BAR]
Max speed 40 km/h
Size Load index Pressure [bar]
10.0/75-15.3 8PR 3 - 3.2
11.5/80-15.3 8PR 2.7 - 3.4
15.0/55-17 10PR 2.5 - 2.7
400/60-15.5 10PR (136A8) 2.4 - 2.6
19.0/45-17 10PR (138A8) 2.2 - 3
480/45-17 146 A8 2.2 - 3
WARNING
It’s important to periodically check the right
tire pressure in order to avoid accidents.
3.4.2 Admitted slopes
The round baler stability is influenced by the
ground conditions and by the type of towing
tractor. The presence of the bale inside the
chamber might suddenly modify in a dangerous
way the tractor and the baler motion.
It is consequently important that the operator well
know the ground
on which he’s working and pay
attention to the condition in which he’ll have to
work.
Pic. 8 shows the admitted slopes for the use of
the round baler, both frontal as well as side way.
Pic. 8
– Admitted slopes
WARNING
Pay lot of attention when operating with lateral
slope in order to avoid the risk that the round
baler overturn because of the holes, ditches or
other ground irregularities, especially when
the door is open.