Siterwell GS690, Инструкция по установке и обслуживанию

Страница: 49 / 63

49
Document NO.: RD-690-39-001 Version: A Date
：
2017.12.30
5 CONDITIONS
5.1 Alarm Condition
When the control and indicating equipment enters the Alarm Condition, the audio/visual alarm devices and output modules
will operate according to their configuration programming.
Figure
– 26
5.2 Actions During the Alarm Condition
5.2.1 Fire Investigation
After the control and indicating equipment enters the Alarm Condition, take the following actions.
1) Enter Access Level 2.
2) Press
【
ACK
】
key to acknowledge the Alarm and silence the internal sounder. The FIRE LED will be on steady and
the internal sounder will silence.
3) Read the details of the alarm event on the LCD and investigate the source of the Alarm Condition.
DO NOT RESET THE CONTROL AND INDICATING EQUIPMENT UNTIL THESOURCE OF THE ALARM HAS
BEEN DETERMINED.
4) If the building or area needs to be evacuated, once the area(s) is cleared, silence the alarm devices by pressing the
【
SILENCED/ ALARM
】
button. The SILENCED /ALARMS LED will turn off. Alarm devices can be re-started by
pressing the button a second time.
5) If the cause of the Alarm Condition was not a fire, enter Access Level 2 and press the
【
RESET
】
button to reset the
fire detection and alarm system.
6) If the cause of the fire alarm has not cleared, the control and indicating equipment will re-enter the Alarm Condition.