Siterwell GS690, Инструкция по установке и обслуживанию

Страница: 42 / 63

42
Document NO.: RD-690-39-001 Version: A Date
：
2017.12.30
4.3.8.1 RTC-Set (Menu Item 7-1-1)
4.3.8.1.1
Description
The time and date can be set. The time and date must be set if different detectors sensitivity settings are used for
day/night. The time and date are also recorded as part of the history log.
The time is set using a 24 h clock. The time and date will be displayed on the LCD.
4.3.8.1.2 Operation
1) By pressing the
【
1
】
key from the General screen enters into the RTC-Set mode.
2) Press direction keys to select date and time.
3) Press NUMBER keys to enter the corresponding date and time.
4) Press
【
ENTER
】
key to confirm, if correct the LCD will prompt MODIFY SUCCESSFUL and error the LCD will
prompt FORMAT ERROR! MODIFY AGAIN!
5) Press
【
MENU
】
key to return to previous menu.
4.3.8.2 Day/Night Time (Menu Item 7-1-2)
4.3.8.2.1
Description
The nominal starting time point between night and day can be configured. The typical setting is to use sunrise and
sunset times. The time is set using a 24 h clock. The function is used:

The "day" is taken to start at the day time setting, not a midnight.

Where different detector sensitivities are configured between day and night.(see Menu Item 5-1-5)
4.3.8.2.2 Operation
1) By pressing the
【
2
】
key from the General screen enters into the Day/Night mode.
2) Press direction keys to select day and night time.
3) Press NUMBER keys to enter the corresponding day and night time.
4) Press
【
ENTER
】
key to confirm, if correct the LCD will prompt MODIFY SUCCESSFUL and error the LCD will
prompt FORMAT ERROR! MODIFY AGAIN!
5) Press
【
MENU
】
key to return to previous menu.
4.3.8.3 Delay Night (Menu Item 7-1-3)
4.3.8.3.1
Description
The delays configured for audio/visual alarm devices and output modules may be bypassed at night. Two optional
settings may be selected:

OFF, where the delays are cancelled.

UNAFFECTED, where configured delays remain active.
4.3.8.3.2 Operation
1) By pressing the
【
3
】
key from the General screen enters into the Delay Night mode.
2) Press the
【
UP
】
or
【
DOWN
】
key to select UNAFFECTED or OFF.
3) Press
【
ENTER
】
key to confirm the selection and it will automatically return to previous menu.
4.3.8.4 Config Eva-Timer (Menu Item 7-1-4)
4.3.8.4.1
Description