Siterwell GS690, Инструкция по установке и обслуживанию

Страница: 35 / 63

35
Document NO.: RD-690-39-001 Version: A Date
：
2017.12.30
4.3.2.1 Zone Status(Menu Item 2-1)
4.3.2.1.1
Description
Zones programmed on the addressable loop may be disabled and enabled. A disabled zone will not report any events
(alarms or faults) from connected devices.
Disabled zones will be indicated on the LCD and can be reviewed using
【
DISABLED
】
key.
4.3.2.1.2 Operation
1) By pressing the
【
1
】
key from the Zones screen enters into the Zone Status mode.
2) Press the
【
UP
】
or
【
DOWN
】
keys to select the zone number step by step or quickly. The status of the zone will
be displayed to the below of the zone number (ENABLED OR DISABLED).
3) Press the
【
LEFT
】
or
【
RIGHT
】
keys to move the cursor between zone number and zone status.
4) Press the
【
UP
】
or
【
DOWN
】
keys to select ENABLED or DISABLED status.
5) Press the
【
ENTER
】
key to confirm the selected status.
6) Press
【
MENU
】
key to return to previous menu.
4.3.2.2 Zone to Device(Menu Item 2-2)
4.3.2.2.1
Description
Devices can be grouped together in up to 40 discrete zones.
4.3.2.2.2 Operation
1) By pressing the
【2】
key from the Zones screen enters into the Zone Device mode.
2) Press direction key to select loop number, device number or zones number. If the zone number shown is 000,
then no zone has been assigned to the device.
3) When the desired zone number is shown, press the
【
ENTER
】
button to confirm the selection.
4) After that, it will change to the next device and the zone assignment process can be continued.
5) Press
【
MENU
】
key to return to the previous menu.
4.3.2.3 Zone Delay(Menu Item 2-3)
4.3.2.3.1
Description
The output devices like output module or sounder/visual alarm of the zone will delay action till the delay time expire.
The delay time is from 00:00(minute: second) to 09:59, maximum about 10 minutes. If the times is 000, then no delay
has been assigned to the zone.
4.3.2.3.2 Operation
1) By pressing the
【
3
】
key from the Zones screen enters into the Zone Delay mode.
2) Press direction keys to select zone number, status, minutes, seconds.
3) The status of zone delay is the IMMEDIATE or DELAYED. DELAYED indicates the delay time will assigned to
DD/MM/YY <Panel Status> HH:MM:SS
1. Zone Status
2. Zone to Device
3. Zone Delay [Zones]