Siterwell GS690, Инструкция по установке и обслуживанию

Страница: 39 / 63

39
Document NO.: RD-690-39-001 Version: A Date
：
2017.12.30
4.3.5.2 Device Status(Menu Item 5-1-2)
4.3.5.2.1
Description
An individual addressable device may be disabled or enabled. When disabled, the device will not report fire or fault
events and no outputs will activate.
However, audio/visual alarm devices will continue to operate in the Alarm Condition.
Disabled devices will be indicated on the LCD and can be reviewed using
【
DISABLED
】
key.
4.3.5.2.2 Operation
1) By pressing the
【
2
】
key from the Device screen enters into the Device Status mode.
2) Press direction keys to select the loop number, devices number and status information.
3) Press the
【
ENTER
】
key to confirm the selected status and it will change to the next device status for further
disabled/enabled assignments.
4) Press
【
MENU
】
key to return to previous menu.
4.3.5.3 Device to Evacuate(Menu Item 5-1-3)
4.3.5.3.1
Description
Devices may be configured initiate an immediate building evacuation when a fire is detected.
All audio/visual alarm devices (including disabled alarm devices) will be activated immediately.
4.3.5.3.2 Operation
1) By pressing the
【
3
】
key from the Device screen enters into the Device to Evacuate mode.
2) Press direction keys to select the loop number, devices number and status information.
3) Select the status UNAFFECTED or IMMEDIATE.
4) Press the
【
ENTER
】
key to confirm the selected status and it will change to the next device status for further
unaffected/immediate assignments.
5) Press
【
MENU
】
key to return to previous menu.
4.3.5.4 Inhibit Aux-Relay (Menu Item 5-1-4)
4.3.5.4.1
Description
Devices may be configured to inhibit the activation of auxiliary output relays. If select ALL status, the relay will not
activate when the device detects a fire or make a fault condition.
4.3.5.4.2 Operation
1) By pressing the
【
4
】
key from the Device screen enters into the Inhibit Aux-Relay mode.
2) Press direction keys to select the loop number, devices number and inhibited information.
3) Select the inhibited status NONE or ALL.
4) Press the
【
ENTER
】
key to confirm the selected status and it will change to the next device status for further
none/all assignments.
5) Press
【
MENU
】
key to return to previous menu.
4.3.5.5 Timed-Sens (Menu Item 5-1-5)
4.3.5.5.1
Description
Different sensitivity settings may be configured for day and night. Where day and night sensitivity settings are
configured, the day, date and time clock must be set meanwhile the day and night time also must be set.