USER INFORMATION
Page 4 of 37
SICAT JMT
⁺
Jaw Motion Analysis System
USER INFORMATION
MANUFACTURER INFORMATION
SICAT GmbH & Co. KG
Brunnenallee 6
53177 Bonn
Germany
Tel49 (0)228 / 854697-11
Email: [email protected]
Internet: www.sicat.com
CONFIGURATION OF THE OPERATING INSTRUCTIONS
The operating instructions for the SICAT JMT
⁺
jaw motion analysis system consist of two parts:
1. SICAT JMT
+
system technical data and instructions for use
2. SICAT JMT
+
instructions for use of the user software
The part SICAT JMT
+
system technical data and operating Instructions primarily contains information
concerning the technical data and operation of the SICAT JMT
+
system, as well as information on its safe
operation in combination with the patient accessories such as the bite-fork or infrared remote control.
Information concerning accessory components is limited to key safety and maintenance measures
and/or hygiene measures.
CAUTION
The exact compliance with the information in both parts of the operating
instructions is required for proper use.
USED SYMBOLS
Green highlighting around the side of the instructions for use designates new information concerning
product safety.
Warning instructions designate a potential danger to the health and safety of users and/or patients. The
instructions explain the type of danger and how it can be avoided.
NOTICE
Notices designate a potential danger that can cause damage to the device. The
instructions explain the type of danger and how it can be avoided.
The CE mark with code number 0197 of the notified body TÜV Rheinland LGA Products GmbH confirms
the conformity of the measurement system with guideline 93/42/EEC (Medical Devices Directive).
1
1.1
1.2
1.3
