SineDigital MW-1500AP(H) Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 28

SineDigital MW-1500AP(H) Скачать руководство пользователя страница 21

SineDigital,Inc.

Installation Guide for MW-1500AP(H)

Entire contents 2003

SineDigital,Inc

.

All rights reserved

Page 21

(12) rf

Typing this command at the prompt will present you with a series of prompts where you can
configure settings for RTS Threshold, Fragment Threshold, Power Save Mode, Beacon Interval,
Basic Rates, Supported Rates, Tx Control Rates, etc. The factory default settings for these
parameters are already at their optimum settings and it is recommended that you

do not

modify

them. But in case you do, please proceed with caution.

AccessPoint> rf
RTS Threshold (current: 2432)  [0~3000] :
Fragment Threshold (current: 2346) [256~2346 EVEN NUMBER only!] :
Beacon Interval (current: 100) :
Transmit Rate Control(current: f) [HEX] :
Basic Rates(current: 3) [HEX] :
Supported Rates(current: f) [HEX] :
DTIM Period(current: 1) [DECIMAL] :
Preamble (current: 1) [1.long, 2 short, 3 auto] :
PM Multicast Buffering (current: Yes) [y/n] :

Change the configuration options as below.

RTS Threshold         : 2432
Fragment Threshold   : 2346
Beacon Interval       : 100
Transmit Rate Control : 0xf
Basic Rates           : 0x3
Supported Rates       : 0xf
DTIM Period           : 1
Preamble: : 1
PM Multicast Buffering: Yes

Proceed?  (Y/N)
Configuration saved successfully.

Changes will effect after reboot.
Reboot the system with "[~@home]" command.
AccessPoint>

(13) reboot

This command restarts the MW-1500AP(H)'s system (reboot). Rebooting the MW-1500AP(H)
is necessary for any configuration changes to take effect.

«
...
19
20
21
22
23
...
»

Содержание MW-1500AP(H)





























Отзывы:

Нет отзывов