SineDigital MW-1500AP(H) Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 28

SineDigital MW-1500AP(H) Скачать руководство пользователя страница 10

SineDigital,Inc.

Installation Guide for MW-1500AP(H)

Entire contents 2003

SineDigital,Inc

.

All rights reserved

Page 10

MW-1500AP(H) Installation

Step 1: Make sure the MW-1500AP(H)'s "POWER SWITCH" is turned off. Connect the

Ethernet cable (RJ-45) from router or ADSL modem, etc. into the MW-1500AP(H)'s "WAN"
port.

Step 2: You may also connect another device such as a PC, printer, access point, etc. to the

MW-1500AP(H)'s "LAN" port. Consult the manual of the device you wish to connect with the
MW-1500AP(H).

Step 3: Connect the power adapter into the MW-1500AP(H)'s "DC 5V/2A" jack and then into

the power outlet. Turn the MW-1500AP(H)'s "POWER SWITCH" to ON. Use only the power
adapter (5V DC/2A) supplied with the MW-1500AP(H).

Step 4: After proper configuration setup of the MW-1500AP(H), wirelessly connect the client PC

(equipped with a WLAN interface card, such as a WaveCast client card) with the MW-
1500AP(H). Consult the WLAN interface card's instructions.

Although you can wirelessly connect with the MW-1500AP(H) without having to perform any

prior configuration settings on it, you will still need to make sure your wireless network interface
card (e.g. WaveCast PCMCIA cards and USB dongles) is properly configured to successfully
connect with the MW-1500AP(H). Consult your wireless network interface card and configure it
based on the MW-1500AP(H)'s factory default values shown below.

- Operation mode: AP mode (compliant to IEEE 802.1d). This means that each client PC that

connects wirelessly with the MW-1500AP(H) needs to have its own IP address.

- SSID: wavecast

- Channel: 3

- WEP Encryption: off

«
...
8
9
10
11
12
...
»

Содержание MW-1500AP(H)





























Отзывы:

Нет отзывов