Simrad EY500, Инструкция по эксплуатации

Страница: 39 / 262

Simrad EY 500
P3402/C
5
1 INTRODUCTION
NOTE !
The EY 500 Instruction Manual is based on software version 5.30.
Changes made in the software may require amendments in this manual.
1.1 THE INTERACTIVE MENU SYSTEM
The EY 500 system is operated via the PC keyboard. Operation is based on an
interactive menu system which to a large extent is self-explanatory with all
operational options listed on the display.
The keyboard arrows enable you to move a cursor (a reverse field) over the
desired choices in the menu. Each press on one of the up or down keys will move
the cursor one line up or down in the text. The keyboard arrow pointing to the
right is used for moving into different levels in the menu and for entering
values. The arrow pointing to the left is used for moving back to a higher level
in the menu system.
The start procedure is described in paragraph 1.3. For installation of the EY 500
software, refer to section "Installation, System Test and Calibration".
1.2 ECHOGRAM LAYOUT ON DISPLAY AND PRINTER
1.2.1 Introduction
Figure 1 shows the display layout. The menu field is on the left-hand side of the
screen, and the echogram on the right-hand side. In addition to the echoes, the
following information may be presented:
Layer lines
Super layer
Bottom range echogram
Scale lines
Integration line
Event marker
Bottom lines