manualshive.com logo in svg

Simrad EY500, Инструкция по эксплуатации, Страница: 77 / 262

Поделиться
Скачать
Simrad EY500 Скачать руководство пользователя страница 77

Simrad EY 500

P3402/C

43

Pulse Length

Options:

SHORT
MEDIUM
LONG

You may select between three different pulse lengths
(pulse durations). A short pulse length gives a better
vertical resolution while a long pulse length is used to
increase the detection range.

There is a close connection between choice of pulse length
and choice of bandwidth. See Bandwidth description
below.

Bandwidth

Options:

NARROW
WIDE
AUTO

Your may select between WIDE and NARROW manual
bandwidth, or AUTO for automatic selection. 
A narrow bandwidth results in little noise, but a poor
pulse response. A wide bandwidth lets through more
noise, but improves the pulse response.

In AUTO the bandwidth is automatically adjusted to the
pulse length:

-

WIDE bandwidth for Short and Medium pulse length

-

NARROW bandwidth for Long pulse length. 

Please observe that NARROW bandwidth should not be
used in combination with Short and Medium pulse
length.

Wide bandwidth is approximately 1/10 of the frequency.
Narrow bandwidth is approximately 1/100 of the
frequency.

Содержание EY500







































































































































































































































































Отзывы:

Нет отзывов