Simrad ARGUS FMCW 3G, Руководство пользователя

Страница: 50 / 150

48 |
Basic operation | Argus Radar Operator Manual
¼
Notes:
•
The same function could be stored more than once in a FK, e.g. if “True Vector” is stored on
all of the 6 functions of FK1, pressing FK1, the vectors presentation is changed to True mode 6
times, with no other change visible to the operator.
•
Also, some functions in the list are complementary, in this case one overwrite the other one,
e.g. if in the first button “Range 24 NM” is selected and in the second one “Range 3 NM”, then
by pressing the relevant FK, the range is set first to 24 NM and immediately after to 3 NM, with
no change visible for the operator.
After the functions have been stored (selecting them from the list and pressing “Accept”), all
6 functions can quickly be set/activated, just by pressing the corresponding FK. For example,
the vector presentation is set to True Motion, the orientation and presentation of the PPI is set
to North Up, True Motion, True Trails, the colors are set to Day, and so on up to the 6th func-
tion, which is Scan to Scan On, 1 scan.
Once the FK1 has been pressed, the above functions are executed and the “F1” button
changes its background to yellow, which means that it is the one currently activated.
Now, if the FK1 is pressed again, the system deactivates the functions from FK1, and restores
the system situation as before the FK1 button was pressed. The yellow background disappears
from FK1. This does not mean that the complementary functions to FK1 will be activated. For
example, if FK1 sets the vectors to “True Vectors”, and the vectors were set also to “True Vec-
tors” before FK1 was activated, then after pressing FK1 the second time, the vectors will stay
“True Vectors”.
Key click
The function of this button is to enable/disable the beep sound when pressing any of the
pushbuttons.
Warning beep
The function of this button is to enable/disable a beep when receiving a warning signal.
Help Online
The Help Online check button enables/disables the help functionality that provides the sug-
gested messages when a widget (button, check button, spin box etc.) is focused. Note, that
the help will be available only after clicking the “Accept” button.
Date format
By pressing the button indicating the date format, a list of possible date formats will open,
allowing to select the preferred type:
•
Day-Month-Year (DD-MM-YYYY)
•
Month-Day-Year (MM-DD-YYYY)
•
Year-Month-Day (YYYY-MM-DD).