Simrad ARGUS FMCW 3G, Руководство пользователя

Страница: 49 / 150

| 47
Basic operation | Argus Radar Operator Manual
Cursor rest position
The function of this button is to define a position for the trackball pointer to move to after
a defined timeout, which will allow the operator to always know the exact position of the
cursor. To turn on the Cursor Rest Position function, press the “Cursor Rest Pos Off”, which will
change to “On” and another button and label will be shown in the row below the button.
Now, pressing the “Set Rest Position” button will open the Rest Position Storing mode; the left
label of the Help line will indicate “Rest Pos”. In this mode, the operator can move the trackball
to indicate the desired cursor position and then click the left SK to confirm it. The default and
minimum timeout after the cursor is moved to the rest position is 15 seconds, but this interval
can be modified by operator by clicking on the specific label with the center key.
¼
Note:
The cursor rest position is operative only after clicking the “Accept” button.
User functions
In order to avoid repetition of procedures specific to the desired operating mode, it is possible
to save and recall specific operating functions. There are three buttons, which allow recalling
these functions. They are called user function keys FK1, FK2 and FK3.
In the personal settings menu, there are three buttons: Function 1, Function 2, and Function
3. When pressing one of them, a new window with 6 buttons will be displayed. When press-
ing any of these 6 buttons, a list of selectable functions will be shown. This gives the operator
the possibility to store up to 18 functions (6 functions for each of the three function buttons),
which can be quickly recalled by pressing the pushbuttons “FNCT 1”, “FNCT 2” or “FNCT 3” of the
keyboard or the buttons “F1”, “F2” and “F3” placed under the Help line in the system data area.
To change a function from the list, press one of the 6 list buttons of the “Function Key Menu”
and the list will open (see example next page). Choose a function from the list, and select it.
After all 6 buttons in a function key have been selected, press the Accept button to store the
function key content in the setup content file, so the selection can be recalled after a system
restart.