Sim2 CRYSTAL4-SH, Руководство пользователя

Страница: 27 / 64

CRYSTAL4-SH
User Guide
27
Control
You can connect the CRYSTAL4-SH projector to a Personal Computer or a control
system through one of the following methods:

RS-232 port, using a standard 9-pin straight serial cable

RS-232 port, using a USB to serial converter cable. In this case, installation of a
device driver provided by the cable manufacturer may be required.

Ethernet port, using a Straight Through cable.
Note: RS-232 communications are limited to max 15 m (50 ft.), VGA communication
are limited to max 20 m (65 ft.), HDMI communication are limited to max 20 m (65
ft.), CVBS & YPbPr are limited to max 20 m (65 ft.).
Triggers
Some Home Theater devices can be controlled through a 12 V signal. The projector
can output a 12 V (500mA) signal:

12V TRIGGER provides a standard trigger for motorized screens control
USB
USB-A for 5V, 1.5A for service functions.
AC Power
Plug the female end of the power cord to the AC receptacle located on the left hand
side of the projector (100-240 V AC, 50-60 Hz) and the other end into a grounded AC
outlet. An high-quality surge protector is recommended while a UPS is optional.