Sim2 CRYSTAL4-SH, Руководство пользователя

Страница: 48 / 64

CRYSTAL4-SH
User Guide
48

Logo : use this function to set the desired startup screen. If changes are made,
they will take effect the next time the projector is powered on. Select “Default”
for the SIM2 startup screen or “Neutral” to do not have the logo displayed on
startup screen.

Background Color : use this function to display a blue, red, green, grey color, or
none when no signal is available.

HDMI 2 Setting : choose the HDCP configuration about the compatible input
signal. Select EDID1 for 480i/p, 576i/p, 720p, 1080i/p, or 2160p input signal.
Select EDID2 for non-interlaced signals only.

HDMI 1 EQ : is to set HDMI 1 equalizer value for short or long HDMI cable to
ensure all compatible signals passed between devices. Range [1..7].

HDMI 2 EQ : is to set HDMI 2 equalizer value for short or long HDMI cable to
ensure all compatible signals passed between devices. Range [1..7].

HDMI 3 EQ : is to set HDMI 3 equalizer value for short or long HDMI cable to
ensure all compatible signals passed between devices. Range [1..7].

Detail Filter : is a sharpness function. It can adjust image display from softer to
sharper. Range [0..2], where value 0 identify the Off status.
Reset
Return the factory default settings for specified submenu.

Reset OSD : default settings for all OSD menus, except for the following
parameters: projection, Power mode, Security, Language, Networks items, Bright
Mode, Eco Mode, Total Lamp Hours.

Reset to Default : default settings for all OSD menus.