Sim2 CRYSTAL4-SH, Руководство пользователя

Страница: 54 / 64

CRYSTAL4-SH
User Guide
54
7 Electronic Perfect Fit
The Electronic Perfect Fit is a feature to accommodate both anamorphic and 16:7
images on the screen.
The CRYSTAL4 SH can project images with screen formats either anamorphic and 16:9,
both matching an anamorphic screen. Below are the instructions for setting up the
projector to display both screen formats to an anamorphic screen (2,35:1 or similar).
This with a fixed anamorphic screen or a motorized horizontal masking screen.
Below the typical setup when there is a screen format of 2,35:1 or similar.
The projector needs to be positioned in the room to accommodate the 2:35 screen.
The 16/9 being smaller will be fine.
To customize the 16:9 image size (to match some special screens), follow the
procedure below:
1. Install the projector in your room to accommodate the anamorphic screen
(see the User Manual installation chapter).
2. Display an anamorphic image or test pattern.
3. Adjust the Zoom, Focus and Optical Vertical shift to match your screen with
the anamorphic format.
4. Display a source with image format at 16:9.
5. In “Display” menu, enter in “Digital Zoom” submenu. Set the digital zoom at
the negative value (–xx), by using arrow keys, until the image matches your
screen (-27 is the standard number that fits the 16/9 picture on anamorphic
screen).
Screen format 2,35:1
Black bands in the 16:9
DMD format, when the
signal contents is in the
format 2,35:1
Image format 16:9
Image format 16:9