Sim2 CRYSTAL4-SH, Руководство пользователя

Страница: 31 / 64

CRYSTAL4-SH
User Guide
31
To select menu items press  on the remote control. To turn off the main menu
press on the remote control. Use  ,  to change settings on a selected item.
Note: Depending on the selected input source and signal characteristics, some
adjustments may not be available.
Display and Setup menu sections provide access to most commonly-used projector
adjustments. Note that, in Display menu:

you can enter these sections only when an image is displayed;

the controls in these sections only operate on the active input;

when you select another input all the settings in these sections are automatically
saved;

each time you select an input the previously saved settings for that input or mode
will be automatically recalled;
Setup section provide access to installation and OSD adjustments. The settings in
these sections are global (for all inputs and modes, not just the active one).
Live Colors Calibration software (LCC)
To aid calibration, the CRYSTAL4-SH projector, feature the new SIM2’s advanced Live
Colors Calibration 5.0 software that enables professional calibration of many
projection parameters such as complete adjustment of the primary, secondary and
white point color coordinates. This PC-based software gives calibration experts
unprecedented control over the projector image quality.
SIM2 recommends the use of LCC software to calibration experts only, by using
spectrophotometers or color probes to correctly analyze and adjust the colorimetry.