Silvercrest 360253 2010, Руководство по эксплуатации

Страница: 86 / 411

86 - English
14. Transporting the appliance
Always transport the appliance vertically, wherever possible. If necessary, it is also possi-
ble to transport the appliance on its back.
15. Troubleshooting
Technical faults
Fault Possible cause Solution
The appliance
does not start. Fuse defective or circuit
breaker tripped

Change the fuse or switch on the
circuit breaker again. Make sure
that the electric circuit is protected
with at least 10 ampere.

Switch the appliance on.
Appliance door is not ful-
ly closed

Close the door correctly. It must
audibly click into position.
Power supply interrupted

Connect the mains plug (20) to a
socket correctly.
Water was not
pumped out of
the dishwasher. Drain hose is kinked

Route the hose so that it is not
kinked.
Filter (5) blocked

Clean the filter (5) regularly.
Drain blocked

Check the drain. Make sure the
drain hose is properly installed.
General faults
Fault Possible cause Solution
Foam in the
appliance Incorrect detergent

Only use detergent that is suitable
for household dishwashers.

If foam has formed, open the ap-
pliance and wait approx. 20–30
minutes until the foam has reced-
ed.

Fill the water tank with 1.5 l wa-
ter and allow the water to drain
manually.

If necessary, repeat the process
several times until the foam has
been rinsed away.