Silvercrest 360253 2010, Руководство по эксплуатации

Страница: 90 / 411

90 - English
16. Error messages
Error message Problem Solution
Extra dry op-
erating light flash-
es
No water supply detect-
ed or water supply too
slow

Flow rate measurement, drain
valve or pump failure, contact the
service department.
The intensive pro-
gram
, ECO
and quick pro-
gram oper-
ating lights are lit
up permanently
Too little water filled,
No water supply detect-
ed in the first three min-
utes

Fill up the water tank until an
acoustic signal sounds.

Then press the button (13) to
start the appliance.
Extra dry and
ECO operating
lights flash
Wash temperature is not
reached

Heating element/thermistor error,
contact the service department.
The intensive pro-
gram
oper-
ating light flashes
quickly
The appliance over-
flows/leaks.

Make sure that the door is closed
correctly and that the water sup-
ply and drain are connected cor-
rectly.

Turn off the water supply.

If water is on the appliance base
due to overfilling, remove the wa-
ter before restarting the dishwash-
er.
Extra dry , in-
tensive program
and quick
program op-
erating lights flash
Error display on control
panel

Contact our Service Centre.
The intensive pro-
gram
, quick
program and
ECO operating
lights are lit up
permanently
Insufficient water sup-
plied to the water tank
within 3 minutes.

Fill up the water tank with more
water until a quick acoustic signal
sounds.

Then press the button (13) to
start the appliance.
Salt container (10) is
empty

Replenish the salt container (10)