Silvercrest 360253 2010, Руководство по эксплуатации

Страница: 68 / 411

68 - English

Secure the hose end so that the hose cannot slip (see Fig. H ).
8.4.2. Feeding the hose into an outlet pipe
NOTICE!
Possible material damage!
Material damage is possible in the event of water leakage.

Make sure that the outlet hose is always introduced into
an outlet at a height of 60 cm, as otherwise the pump ca-
pacity would be impaired.

Under no circumstances may the hose end lie under wa-
ter.

Ensure that the supply and drain hoses are not kinked or
crushed.

You can also feed the drain hose into a drain pipe. Mount the hose in the outlet pipe in
such a way that it cannot come loose and that water can flow downwards freely.

The drain hose can be extended by max. 100 cm. Use an extension with an internal di-
ameter that is at least the diameter of the original hose or a suitable connecting piece.

The hose extension should run along the floor – only the pipe section in the proximity of
the outlet point should run upwards.
8.4.3. Running the hose into a sink/container
Fig. I Fig. J

Hang the end of the drain hose into a sink (see Fig. I ) or an appropriately sized con-
tainer (see Fig. J ).

Ensure that the drain hose is inclined sufficiently. The appliance is to be positioned at
least 4 cm higher than the sink/container.