SILLA PRISM SOLAR RFID, Инструкция по установке, использованию и техническому обслуживанию

Страница: 41 / 52

How to store the charging cable
Prism was specially designed to wrap the cable on Prism itself. To store the cable it will
su ce to wrap it
around Prism, making sure that the connector is at more than 0,5m from the ground.
Note: the connector has to be protected by the rubber cap connected to the
connector itself.
Procedure reset
If you can no longer access the Prism web interface (e.g. if you change or lose your
password, or if the network is incorrectly configured), you must reset the settings to
the factory defaults.
●
Ensure that there are no vehicles in charge
●
Switch off the Prism from the upstream disconnector and wait at least 30
seconds
●
Switch the Prism back on and wait about 1 minute
●
Within 5 minutes, press and hold the Prism touch button for 30 seconds (use
the left button for the Duo version)
●
Prism will light up purple LEDs
●
Release the touch button
●
Wait at least 10 minutes without switching off the Prism
●
The settings are restored. You can now access the Prism Wi-Fi using the
factory credentials in the
Product ID section
Update
If Prism is connected to the internet, updates will be installed automatically.
On the
https://silla.industries/changelog/ you can find all information about Prism
updates.
Note: some special updates that change the operation of Prism require manual
intervention to install. Read the changelog and follow the instructions received by
email to start this update.
Prism SOLAR rel. 2.2.2 - 35