SILLA PRISM SOLAR RFID, Инструкция по установке, использованию и техническому обслуживанию

Страница: 15 / 52

Sensor Placement
The sensor allows Prism to regulate the charging current according to household loads
and any photovoltaic system.
Refer to the following diagrams for installation of the additional sensor. In the diagrams
only the phase line is shown,
the neutral must be passed outside the current sensor.
In the case of single-phase systems without a storage system, the current sensor
should be placed according to the following diagram:
Note: for systems with storage systems, please refer to the section on systems with
storage systems.
Prism SOLAR rel. 2.2.2 - 13