SILLA PRISM SOLAR RFID, Инструкция по установке, использованию и техническому обслуживанию

Страница: 16 / 52

Connecting the sensor to Prism Single-phase
For single-phase Prism, the sensor must be connected as follows:
Name Thread color Connection marking
Positive Red +
Negative Black -
Screen Open stocking G
To extend the connection, use a twisted pair with a recommended cross-section of
0.25-0.5 mm2.
Note:
for distances below 100 m a pair of CAT5 or similar cables can be used.
If the twisted pair is laid in contact with power cables or Ethernet cables, or the
installation takes place in a place where electromagnetic interference is present,
the
use of a shielded cable is recommended. Connect the braid on the Prism side only.
14 - Prism SOLAR rel. 2.2.2