Siliken SE3.3Ni, Руководство пользователя

Страница: 38 / 58

Operation
37
user’s manual inverter SE3.3Ni - SE3.8Ni - SE4.6Ni
The following figures explain how the display works for the regular procedure.
When the DC input voltage goes above the minimum MPP voltage, the SE inverter is powered up and will show the company name and model
name (SE4.6NI in this example) on the LCD as shown below.
After 3 seconds, software versions of two embedded CPU, Sequential and Current controllers, will be displayed on the LCD. And then the
serial number of the inverter and the address for the RS-485 communication are displayed.
After the basic information of the inverter is displayed, the system enters the System Check mode that is then indicated on the LCD.
S / N X X X X X
A D D R E S
X X X X X
S X
S L K E L E C T R O N I C
S E 4 6 N i I n v e r t
S
. e r
S E Q n X X X . o i s r e V
C U R n X X X . o i s r e V