manualshive.com logo in svg

Siliken SE3.3Ni, Руководство пользователя

Поделиться
Скачать
Siliken SE3.3Ni Скачать руководство пользователя страница 18

Installation

17

user’s manual inverter SE3.3Ni - SE3.8Ni - SE4.6Ni

Fig. 2.3.1.2 Assembly of the AC cable and the AC connector

CAUTION!

To ensure that the total impedance of the grid plus the interconnection AC power cable shall be less than 1.25  .

1. The AC connector is suitable for cables with a cross-section of up to 4 mm

2

.

2. Connect the cable GND to the screw labeled  of the AC connector
3. Connect the cable N to the screw labeled N of the AC connector.
4. Connect the cable L to the screw labeled L of the AC connector.
5. Tighten the screws with a torque of 0.9Nm.

WARNING!

Each connection to a SE inverter must be installed with a separate circuit breaker with 25A type B. No other appliances may be
connected to the circuit breaker.

6. Reconfirm that all connections have been performed properly as described above and all screws are properly tightened.
7. Plug the AC connector into the AC terminal to complete AC cable connection for the inverter.

Содержание SE3.3Ni



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды