Siliken SE3.3Ni, Руководство пользователя

Страница: 12 / 58

Installation
11
user’s manual inverter SE3.3Ni - SE3.8Ni - SE4.6Ni
2.1 Placement
1. SE inverters may be located indoors or outdoors, according to protection class
IP65.
2. Avoid mounting the inverter on a location where is directly exposed to rains.
3. Leave at least 50 cm of free space above and below the inverter for better ventilation
(see Figure 2.1.1).
4. Mount the inverter on a wall that shall be firm enough to sustain the inverter with
30Kg in weight.
5. Avoid mounting the inverter on a location directly exposed to the sunshine to keep
the ambient temperature of the inverter within -20ºC and 55 ºC.
WARNING!
Some parts of the cooling surface can reach temperature over
70ºC. Keep the flammable and explosive materials an appropriate
distance away from the inverter!
WARNING!
Do not expose the inverter to the corrosive liquids and/or gases.
6. Humidity shall be within 0% and 95%.
7. Keep DC wiring as short as possible to minimize power loss.
8. Mount bracket should be fastened on a concrete or a masonry wall with the
accessory anchors.
Fig. 2.1.1 Clearances required for SE inverter installation
wall