Siliken SE3.3Ni, Руководство пользователя

Страница: 5 / 58

user’s manual inverter SE3.3Ni - SE3.8Ni - SE4.6Ni
• The temperature on the external heat sink may be high in normal operation and cause skin burn injury when touched. Pay attention to high
temperature components.
• Prevent the risk of fire hazard, do not cover or obstruct the heat sink.
• Allow modification in your electrical system to be carried out only by the training-qualified electricians.
Repair and Maintenance
The SE inverter contains no user serviceable parts. Only personnel trained and authorized by SILIKEN ELECTRONICS are allowed to carry
out internal repair and maintenance of the unit. Please return the device for overhaul if some fault is caused.
WARNING!
Not to make alterations or use tampering assembly in the inverter without manufacturer’s authorization unless specified elsewhere
in this Manual. They may result in injury, electric shock, or fire and void the warranty.
Wiring the inverter
• Input/Output Terminals: Use wire size #10 AWG to #6 AWG, 90°C (194°F) Copper Wire.
• Reconfirm all connections and screws have been made correctly and tightened properly.
WARNING!
All electrical installation and the wiring methods shall be done according to the relevant electrical installations stipulated by local
distribution network operator (DNO) and should follow the important safety instructions in this manual.
Connection of the AC cable
WARNING!
Reconfirm the circuit breaker connected to the main utility is switched OFF before connecting the power cable from the breaker
to the AC connector.