Siliken SE3.3Ni, Руководство пользователя

Страница: 46 / 58

Operation
45
user’s manual inverter SE3.3Ni - SE3.8Ni - SE4.6Ni
Error Message Description
DeltaZ
Zac
InvTempMax
COMM
EEPROM
RelayX(X=1~4)
FastEarthCurrent
SlowEarthCurrent
DCInjectCurH
Riso
VdcbusH
VdcbusL
Internal COMM
Watchdog
Idc Test
RCMA
RCMA Test
IR Test
Offset
Temp. Sensor
RAM Test
System Error
Version Error
The rate of change of the AC grid impedance is higher than setting value.
The AC impedance of the grid is out range.
The internal temperature of the inverter exceeded the safe operating limit.
External communication failed.
EEPROM failed.
Grid connection relay failed.
The drastic change of the leakage current has been detected.
The leakage current has exceeded a safe operating limit.
Over DC current injected into the AC grid is detected.
The insulation resistance between PV array and the ground is below the safe
operating limit.
Internal DC bus voltage is over the upper limit.
Internal DC bus voltage is under the lower limit.
Internal communication failed.
Internal watchdog function triggered.
The DC injection current measurement function failed.
The leakage current exceeded standard value.
The leakage current measurement function failed.
The insulation resistance measurement function failed.
Offset check for grid monitoring failed.
The internal temperature sensor failed.
Memory failed
The system failed.
The firmware version is not correct.