Siko AG26, Перевод оригинальной инструкции по установке

Страница: 40 / 48

AG26
Transport, Storage, Maintenance and Disposal English
AG26 · Date 03.02.2022 · Art. No. 87451 · Mod. status 255/21
40
6 4 3 5 1 2
Fig. 11: Battery change
1
Screws
2
Cover
3
O-ring
4
Battery lugs
5
Battery
6
Housing
7 Transport, Storage, Maintenance and Disposal
Transport and storage
Handle, transport and store actuators with care. Pay attention to the fol-
lowing points:
• Transport and / or store actuators in the unopened original packag-
ing.
• Protect actuators from harmful physical influences including dust,
heat and humidity.
• Do not damage connections through mechanical or thermal impact.
• Prior to installation inspect the actuator for transport damages. Do
not install damaged actuators.
Maintenance
With correct installation according to chapter
4
the actuator requires no
maintenance except for battery change to chapter
6
from time to time.
The actuator has received lifetime lubrication and need not be lubricated
under normal operating conditions.
Disposal
The actuator's electronic components contain materials that are harmful
for the environment and are carriers of recyclable materials at the same
time. Therefore, the actuator must be recycled after it has been taken out
of operation ultimately. Observe the environment protection guidelines of
your country.
Battery: Do no throw batteries in the normal waste, into fire or water. Col-
lect batteries and dispose of them in an environmentally friendly way.
Only for EU countries: Defective or used batteries must be recycled accord-
ing to Directive 91/157/EEC.