Siko AG26, Перевод оригинальной инструкции по установке

Страница: 30 / 48

AG26
Installation English
AG26 · Date 03.02.2022 · Art. No. 87451 · Mod. status 255/21
30
L1
d
D
L2
2
1
Fig. 1: Mounting dimensions
dim. øD ø10
H9
dim. L1 30 ±0.5
dim. L2 30 ... 34
dim. ød ø20
h9
Tab. 1: Mounting dimensions
Fig. 2: Mounting
2
Fig. 3: Fastening torque for screws
4
1 3
1
Torque support
2
Shaft
3
Clamp ring screw
4
Open wrench
4.2 Electrical installation
Electric shock from incorrect power supply
` Use a Power supply which is consistent with the requirements for PELV
(Protective Extra Low Voltage).
` Connect the negative output of the power supply with ground (PE ).
Destruction of parts of equipment and loss of regulation control
` All lines for connecting the actuator must be shielded.
` Do not disconnect or close live connections.
` Perform wiring work in the de-energized state only.
` Use strands with suitable ferrules.
` Prior to switching on check all mains and plug connections.
DANGER
WARNING