Siko AG26, Перевод оригинальной инструкции по установке

Страница: 25 / 48

AG26
Documentation English
AG26 · Date 03.02.2022 · Art. No. 87451 · Mod. status 255/21
25
1 Documentation
The following documents describe this product:
• The product data sheet describes the technical data, the dimensions,
the pin assignments, the accessories and the order key.
• The mounting instructions describe the mechanical and electrical
installation including all safety-relevant requirements and the associ-
ated technical specifications.
• The user manual for commissioning and integrating the actuator into a
industrial Ethernet system.
These documents can also be downloaded at
" http://www.siko-global.com/en-de/service-downloads ".
2 Safety information
2.1 Intended use
The AG26 actuator serves for adjustment and positioning tasks on plants
and machines. The actuator is only intended for use in industrial appli-
cations that are not subject to special electrical or mechanical safety
requirements.
1. Observe all safety instructions contained herein.
2. Arbitrary modifications and changes to this actuator are forbidden.
3. Observe the prescribed operating and installation conditions.
4. Operate the actuator exclusively within the technical data and the
specified limits (see chapter
9
).
2.2 Identification of dangers and notes
Safety notes consist of a signal sign and a signal word.
Danger classes
Immediate danger that may cause irreversible bodily harm resulting in
death, property damage or unplanned device reactions if you disregard
the instructions given.
DANGER