SIKA FMP1, Руководство по эксплуатации

Страница: 32 / 56

Device description FMP1
- 32 - © SIKA • Ba_FMP1 • 03/2014
1 Device description
The FMP1 digital measurement amplifier is used for the conversion, evaluation and display of
readings from force sensors or load cells. The weights or forces measured by the connected
sensors are shown directly on the device.
The FMP1 has two user-programmable switching points that control the switching of floating
relay contacts. The analogue output can be configured in the main menu.
Components:
The most important components of the FMP1 are:
 Installation housing with front bezel and connec-
tions on the rear.
 Digital display for force or weight.
 Front panel with controls and status indicators.
Versions:
The FMP1 is available in various versions for units of kN, t or kg.
Along with the standard properties (

§ 10 "Technical Data"), the following features can be
adapted by the user at the time of order or by using the main menu:
Features Standard / optional
Input:
-
Strain gauge input signal
2 mV/V ; 1 mV/V; 3 mV/V
-
other input signals -/- ;  5 V;  10 ; 0…20 mA; 4…20 mA
Output:
-
Analogue output
0…20 mA ; 4…20 mA;

5 V?,

10 V
Supply voltage: 230 V
AC
(50...60 Hz) ; 115 V
AC
(50…60 Hz); 24 V
DC
(15…28V
DC
)
Scope of delivery and accessories:
Before installing the device, check the delivered items and ordered accessories:

1x FMP1 as ordered.

1x Operating manual.

2x Clamping fittings for panel mounting.

Packaging (if applicable).
The device is configured according to the customer order or
as standard. Each device and its components are tested and verified before delivery.