SII MP-A40 SERIES Скачать руководство пользователя

Страница: 6 / 81

OPERATING PRECAUTIONS

The "products" shall collectively mean printer, battery pack, AC adapter, AC cable, car charger, and

battery charger.

WARNING

Never attempt the followings. Failure to follow the instructions leads to fire, electric shock, or accident.

DO NOT disassemble or reconstruct the products.

Take care not to spill liquid on the products.

DO NOT touch the products with wet hand.

DO NOT insert any foreign objects such as a piece of metal or any liquid into the products.

Keep the terminal portion of the products, power connector, AC plug, DC plug and cigar plug

away from dust and metal objects.

DO NOT touch the terminal portion of the products, power connector, AC plug, DC plug and cigar

plug.
To avoid short circuits, prevent terminals of the products, power connector, AC plug, DC plug and

cigar plug from touching any conductor such as metal.

Make sure the AC plug, DC plug and cigar plug are securely plugged in when using the products.

DO NOT destroy the AC cable, AC plug, DC plug and cigar plug.
DO NOT bend, pull, or twist the cable forcibly or place heavy staff on them.

Use the printer only with specified battery pack, specified AC adapter, specified AC cable and

specified car charger.

Use the AC adapter only for specified printer or specified battery charger.

DO NOT connect any AC cable other than specified with the AC adapter.

Use the battery charger only with specified battery pack, specified AC adapter and specified AC

cable.

DO NOT connect the car charger to the battery charger.

DO NOT use the AC adapter and the car charger with a voltage other than specified voltage.

DO NOT charge the battery pack by any printer or battery charger other than specified printer or

specified battery charger.

Содержание MP-A40 SERIES


















































































Результаты поиска

Содержание MP-A40 SERIES

Отзывы:

Похожие инструкции для MP-A40 SERIES

Бренды по названию

Популярные бренды

SII MP-A40 SERIES, Руководство пользователя

Результаты поиска

Содержание MP-A40 SERIES

Отзывы:

Похожие инструкции для MP-A40 SERIES

Бренды по названию

Популярные бренды