51
Long Life Charging
After connecting to the AC adapter, install the battery pack to the printer.
When the battery pack has installed already, remove it from the printer.
(1)
Verify that the printer power is off.
(2)
Connect the AC adapter to the AC cable.
(3)
Plug the DC plug of the AC adapter to the power connector of the printer.
(4)
Plug the AC plug of the AC cable to an outlet.
(5)
Install the battery pack to the printer.
(6)
Turn on the printer.
After POWER LED displays the battery remaining capacity for approximate 3 seconds,
POWER LED turns orange and charging starts when the battery remaining capacity is battery level
2 or less.
When the battery remaining capacity is battery level 1, POWER LED stays to display the battery
remaining capacity, and charging does not start.
During charging, POWER LED lights on orange.
(7)
When the charging is successfully complete to full charge, POWER LED turns to green.
The power is not shut off automatically.
In case that the battery error occurs during charging, ERROR LED displays the error status.
Figure 15-2 Long Life Charging by AC adapter
2
3
4
1
5
6
