56
Long Life Charging
After connecting to the car charger, install the battery pack to the printer.
When the battery pack has already installed, remove it from the printer.
Verify that a car engine is running or in an accessory position.
(1)
Verify that the printer power is off.
(2)
Connect the power connector of the printer to the DC plug of the car charger.
(3)
Plug the cigar plug of the car charger to a car accessory socket.
(4)
Install the battery pack to the printer.
(5)
Turn on the printer.
After POWER LED displays the battery remaining capacity for approximate 3 seconds,
POWER LED turns orange and charging starts when the battery remaining capacity is battery level
2 or less.
When the battery remaining capacity is battery level 1, POWER LED stays to display the battery
remaining capacity, and charging does not start.
During charging, POWER LED lights on orange.
(6)
When the charging is successfully complete to full charge, the light of POWER LED turns to green.
The power is not shut off automatically.
In case that the battery error occurs during charging, ERROR LED displays the error status.
Figure 16-3 Long Life Charging by Car Charger
2
3
1
4
5
