Signode AK200HDX-19 Скачать руководство пользователя страница 20

Страница: 20 / 82

3.3

Operation Description

(See section 4, simplified view)

The strapping head is in home position. The camshaft display indicator is on - 0 - position, and

the camshaft is blocked against rotation in anti-clockwise direction further than the - 0 - position

on the camshaft display. The switch B104 is activated, indicating that the shutter is closed.

With start of the strap cycle program, strap feeding will be initiated. While strap feeding the

motor M24 (see drwg. 464631, pos. 82, page 33) is running in clockwise direction. The small

clutch Y37 "high speed" (see drwg. 100.36, pos. 41, Page 43) of the transmission is activated

and the strap is fed through the chute system at high speed.

On re-entry of the strap into the head, the limit switch B102 positioned in the strap guide wedge

will be activated (see drwg. 464631, pos. 76, page 33). The activated strap feed switch initiates

the large clutch Y22 after a delayed time, causing the motor M24 to interrupt feeding after a

certain time, depending on the setting of the time relay. This setting directly influences the strap

overlap length. During strap feed the camshaft brake Y38 is energised.

Next step; strap being clamped, will be initiated. The motor changes into counter clockwise

direction, at the same time the strap drive brake Y36 will be activated and the "camshaft brake"

Y38 is de-energised. The large clutch Y22 will be activated and the camshaft rotates in

clockwise direction from position 0 into position 1. The proximity switch B106 "max strap tension

reached" will be activated for the first time. The camshaft stops at position 1 and the tip of the

strap will be clamped by the gripper (see drwg. 464655, pos. 8, page 39). Camshaft brake Y38

will be activated again. The strap drive brake Y36 will be de-activated.

Содержание AK200HDX-19



















































































Результаты поиска

Содержание AK200HDX-19

Отзывы:

Похожие инструкции для AK200HDX-19

Бренды по названию

Популярные бренды

Signode AK200HDX-19, Руководство по эксплуатации, частям и безопасности

Результаты поиска

Содержание AK200HDX-19

Отзывы:

Похожие инструкции для AK200HDX-19

Бренды по названию

Популярные бренды