SPECIFICATIONS
Burst Rate
HI Mode: 1.9fps for 6 frames, MED Mode: 2.4fps for 14 frames,
LOW Mode: 2.5fps for 30frames
External Flash Synchronization
Hot shoe (contact X, with dedicated flash linking contact)
LCD Monitor Type
1.8”, Color TFT LCD with appr. 130,000 dot low –temp.
polysilicon, Coverage Area : 100%, Backlight : White LED
Reviewing Images
Single-Image display, Zoom-in display,
9 segments thumbnail display, Slide Show
Language
Japanese / English / French / Germany
Lithium CR(DL)123A x 2pcs.
Battery
Lithium CR-V3 x 2pcs or “AA” alkaline dry cell x 4pcs or
“AA” Ni-Mh x 4pcs or Nickel Zinc Primary Battery x 4pcs
Power Source
AC Adapter
Dimensions
152mm / 6”(W) x 120mm / 4.72”(H) x 79mm / 3.1”(D)
Weight
805g / 28.4oz (without battery)
CONNECTING YOUR CAMERA TO A COMPUTER
The SD9 camera can be connected directly to a computer using the provided USB or
IEEE 1394 (FireWire
TM
) cable. Make sure that the camera is off before connecting it to
the computer. Data transfer rates will vary depending on the computer and operating
system used. The fastest transfer rates can be obtained using IEEE 1394. For further
information, please refer to the SIGMA Photo Pro User Guide, which is available in PDF
format on the supplied CD-ROM.
IEEE1394 Terminal
(FireWire™)
USB Terminal
CONNECTING THE CABLES
USB Cable
l
The shutter button and color LCD monitor will be
disabled while the camera is connected to the
computer via a USB cable.
l
The camera will shut down after 15 minutes of
inactivity—no images being transferred—when
connected to the computer via a USB cable.
IEEE 1394 (FireWire™) Cable
l
Connect the IEEE1394 (FireWire™) directly to
the computer please be sure that the other end
of the cable can be connected to the computer’s
IEEE 1394 terminal.
WARNING!!
Please use only the USB or IEEE 1394 cables supplied with your camera.
·
114
