Sigma 4-16KR, Руководство по эксплуатации

Страница: 56 / 78

4-16KR
Malfunctions and Error Correction
56 Version 10/2010, Rev. 1.9 of 02/07/2012
Translation of the original operating manual
7.3 Service Contact
In the event of queries, malfunctions, or spare part enquiries:
from Germany:
use the service request form at
www.sigma-zentrifugen.de [Service Area]
or contact
SIGMA Laborzentrifugen GmbH
An der Unteren Söse 50
37520 Osterode (Germany)
Tel. +49 (0) 55 22 / 50 07-8425
Fax +49 (0) 55 22 / 50 07-9425
E-mail: service@sigma-zentrifugen.de
outside Germany:
contact our agency in your country. All agencies are listed at
www.sigma-zentrifugen.de [Contacts] [Foreign agencies]
If you would like to utilise our service, please state the type of
your centrifuge and its serial number.
Make use of our service request on the Internet. Please use the
request form (see above) on our website.
8 Maintenance and Service
The centrifuge, rotor, and accessories are subject to high mechanical
stress. Thorough maintenance performed by the user extends the
service life and prevents premature failure.
If corrosion or other damage occurs due to improper care, the
manufacturer cannot be held liable or subject to any warranty claims.
Use soap water or other water-soluble, mild cleaning agents with
a pH value between 6 and 8 for cleaning the centrifuge and the
accessories.
Avoid corrosive and aggressive substances.
Do not use solvents.
Do not use agents with abrasive particles.
Do not expose the centrifuge and rotors to intensive UV radiation
or thermal stress (e.g. by heat generators).