Sigma 4-16KR, Руководство по эксплуатации

Страница: 35 / 78

4-16KR
Using the Centrifuge
Version 10/2010, Rev. 1.9 of 02/07/2012 35
Translation of the original operating manual
The settings are now saved under this program number (program
number 08 in the example).
Fig. 6.16:
Saving the current
settings
6.2.4.2 Calling Up Stored Programs
Turn the left function key until “run” appears on the display
(Fig. 6.17).
Select the option by pressing the right rotary cursor. “Run” will
now flash.
Turn the right function key until the desired program number is
displayed.
Press the right function key to confirm the input.
The saved program settings will be adopted.
Fig. 6.17:
Calling up a stored
program; here program
number 08
6.2.5 Lockdown
This function locks the parameters against all inadvertent changes.
Turn the left function key until a padlock symbol is displayed in
the upper left corner of the display (Fig. 6.18).
As long as the padlock symbol is displayed, the parameters cannot
be changed.
6.2.5.1 Permanent Lockdown
The parameter settings can also be locked with the help of the start
key when the lid is open:
Press the start key three times and on the third time hold it down
for approx. two seconds.
After the activation of the function, the padlock symbol will flash
(Fig. 6.18). Now the centrifuge can be started and stopped, but the
settings cannot be changed.
Proceed in the same way in order to deactivate the function.