34 Appendix A. Advanced Configuration Options
Manual Color Calibration
If the Auto calibration feature displays an error message, follow the
steps below to manually calibrate the color:
1. From the REALmagic Configuration… dialog (refer to Figure
3), click Advanced >>> and then Manual calibration.
2. From the Dialog (Figure 26), use your mouse to move the bar
(marked R) slowly up or down to a point where the image of the
big box on the right-hand side of the Dialog window appears
similar to the image of the "GOOD" box. You can use the UP or
DOWN arrow keys on the keyboard to make fine adjustments.
Click Next. You must perform this procedure three more times
for the colors red, green, and blue. After the last adjustment,
click OK.
Appendix A. Advanced Configuration Options
Figure 26. Dialog
NetStream 2000 Manual 6.6.2000 6/6/00 2:47 PM Page 39