SIGLENT TECHNOLOGIES SDS2000X-E Series, Руководство пользователя

Страница: 199 / 222

SIG L ENT
SDS2000X-E User Manual
173
The following table shows the waveform type and its corresponding characteristics. The
available waveform parameters depend on the waveform type. Each availale parameter
can be adjusted using the
Universal Knob and the corresponding function software under
the menu.
Wave
Type
Parameters
Frequency
Range
Amplitude
(High-Z)
Offset
(High-Z)
Sine
Frequency/Period/Amplitude/Hi
gh-Level/Offset/Low-Level
value.
1 uHz~25 MHz 4 mV~6 V ± 3.0 V
Square
Frequency/Period/Amplitude/Hi
gh-Level/Offset/Low-Level/Duty
value.
1 uHz~10 MHz 4 mV~6 V ± 3.0 V
Ramp
Frequency/Period/Amplitude/Hi
gh-Level/Offset/Low-Level/Sym
metry value.
1 uHz~300 kHz 4 mV~6 V ± 3.0 V
pulse
Frequency/Period/Amplitude/Hi
gh-Level/Offset/Low-Level/
Width/ Width Fine value.
1 uHz~10 MHz 4 mV~6 V ± 3.0 V
Noise Stdev/ Mean value.
DC Offset value. ± 3.0 V
Arb
Frequency//Period/Amplitude/H
igh-Level/Offset/Low-Level
value.
2. To set Arb waveform
Press the Utility
→
Next Page4/4
→
AWG
→
Wave
→
Wave Type
,
then select the Arb, and it
has two types:
Stored Arb
：
Users can create and edit arbitrary waveforms by using EasyWave software and a
compatible computer. Waveforms can be downloaded directly to the instrument using the
software or read from a USB memory device which has a valid arbitrary waveform file.
Choose
Wave Type → Arb → Arb Type → Stored , enter the stored Arb interface and
invoke the waveform in the external storage device.
Built-in Arb
：
Choose
Wave Type
→
Arb
→
Arb Type
→
Built-in
to enter the following interface,
rotate the knob to move the cursor, press the knob to select to the desired waveform, and
then return back to Built-in waveform interface.