Modem Status, Customization, and Reset Commands
Rev.
6
Oct.18
Proprietary and Confidential - Contents subject to change
87
!PCINFO
(continued)
Return power control status information (continued)
•
Condition types:
•
W_DISABLE—W_DISABLE is asserted
•
USER—AT/SDK/Legato command was issued
•
TEMP—Temperature is outside operational limits
•
VOLT—Voltage is outside operational limits
•
BIOS—Host BIOS locking is enabled
•
GOBIIM—Image preference mismatch
!PCOFFEN
Set/return Power Off Enable state
The modem can be configured to enter low power mode or power off when W_DISABLE is
asserted. (This is called the Power Off Enable feature.)
Use this command to indicate or set the Power Off Enable feature state.
Password required:
Yes (see
for details)
Usage:
•
Execution:
AT!PCOFFEN=<state>
Response:
OK
Purpose:
Set the current state.
•
Query:
AT!PCOFFEN?
Response:
<state>
OK
Purpose:
Report the current <state>.
Parameters:
<state> (Current state of Power Off Enable)
•
0 = Modem will enter LPM (low power mode) when W_DISABLE is asserted.
•
2 = Ignore changes on W_DISABLE.
Table 3-2: Modem Status Command Details (Continued)
Command
Description
Содержание AirPrime WP75 Series
Страница 1: ...AirPrime WP8548 WP75xx WP76xx WP77xx AT Command Reference 4118047 Rev 6...
Страница 2: ......
